[VIPfirst6year] index:0 Mobiltelefon:86-21-33888857
Email:info@jinghuichina.com
metrology addition silicone rubber casting material
| Preis | $ 59.00 | $ 55.00 |
| Menge | 5-9 Boxes | ≥10 Boxes |
Chatte jetzt! 
- place of Origin:
- anhui, china
- brand Name:
- chemoment
- color:
- blue
- shelf life:
- 2 years
- usage:
- impression
- certificate:
- SGS
- hardness:
- 45~70 shore
- working time (mins):
- 1
packaging & delivery
- selling Units:
- single item
- single package size:
- 18x10x15 cm
- single gross weight:
- 1.100 kg
- package Type:
- 400g*2 putty like
- lead time :
quantity(Boxes) 1 - 500 >500 Est. Time(days) 7 To be negotiated
online customization
metrology addition Silicone rubber Casting material
replicate any shapes of parts quickly
addition silicone Casting Material/mold making material
withstand 400fd
metrology-grade
metrology addition Silicone casting material
replicate any shapes of parts quickly,necessary testing material for everyday use at manufacturing factories
The products are classified as putty and sringeable materials according to consistency
Non-toxic, odorless, safe
*Metrology-Grade Rubber, cured in 10 minutes
*Virtually perfect Replica casting of internal and external Shapes and cavities
*Non-Toxic, safer than fellow products
*Suitable for optical measuring, easy cut by electrician's knife
*Withstand 200°C
1. casting putty
1.1. performance
part A: Catalyst, white
part B: Base, blue
package: 2*400g (specific package available upon request)
parameter | specification |
working time at room temperature | > 90sec |
setting time at room temperature | < 10min |
hardness (shore A) | 50±3 |
permanent deformation % | <0.3% |
dimensional stability % | <0.25 |
detail reproduction (μm) | 50 |
tensile breaking Strength (MPa) | 2.86 |
temperature stability | 60°C 1week |
elongation at Break % | 290 |
1.2. putty Material introduction and attention
1) roll two equal-sized balls of catalyst putty and base putty and simply knead them together like dough. make a homogeneous color within 40sec (no white color visible). simply spread over master pushing down with fingers and wait for cure 8-10 minutes. working time prior to colon added, therefore12-15 minutes start to finish. You can also cast internal shapes and cavities but some pressure should be applied such as a weighted object on top.
2) Sulfur, amine and organic tin will inhibit the setting of putty. avoid the contact with the foregoing chemicals. Do not use latex gloves. wear vinyl gloves or use vinyl overliners.
3) temperature has significant effect on cure speed. The higher room temperature is, the faster the cure will be. If room temperature is higher than 25 °C, keep the materials in a refrigerator prior to use.
-
Porzellan-PP-Hohlblatt/Kernkunststoffplatten/Board-Preis
-
Pp hohle Kugel/Pp Hohlblechkästen/Pp hohlkugeln aus kunststoff
-
Geprägte pp. Polypropylen-Wellpappe-Hohlplattenplatte
-
Billig pp hohlblech/Pp Wellpappe/Pp hohlplatte preis
-
Polypropylen PP hohl gewellte Platte/Koroplast/Korrekt/Flut/Corflute/Flötenblatt
-
Hochwertiges stanzen plastic1220 * 2440mm pp hohlblech
-
1220*2440Mm Corrugated Coroplast PP Plastic Fluted Polypropylene Hollow Board Sheet For Floor Covering
-
4x8 colored and transparent recycled coroplast pp hollow corrugated plastic sheet